Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Venice
Gate installation in Venice, CA costs between $1,800 and $12,000 depending on the gate type, material, operator, and site conditions. Most driveway gate installations in Venice run $3,200 to $7,500 including the operator, safety equipment, and post setting. You get a written price before any work starts, and a live person answers when you call (213) 267-6777.
We work Venice’s tight lots, shared driveways, and canal-side properties every week. The salt air off the Pacific, the marine layer that never quite burns off, and the narrow alleys off Abbot Kinney all shape how a gate needs to be installed here. What holds up in Culver City will not hold up three blocks from the beach. We plan for that from the first measurement.
Why Vance Gate Repair Venice Is Venice’s Preferred Gate Installation Company
We are not a general fencing company that also hangs gates. Vance Gate Repair was founded in 2014 by Adrian Vance out of commercial access-control work, and we carry that documentation habit into every residential gate we install in Venice. You get a written scope, a written price, and a photo record of what was installed, where, and how. That is Gate Installation done under The Haven Standard, Clause 1: have it in writing before anyone picks up a tool.
Our technicians know the Venice Canal Historic District block by block. They know which post footings sit in original brick walkways. They know which alleys off Lincoln and Rose give a truck enough clearance to stage a slide gate panel. They know the difference between a gate that needs new hinges and a gate that needs a new post below grade, because they have pulled enough canal-side posts in Venice to see the corrosion pattern before the digging starts.
Every Venice job gets a background-checked, uniformed technician with name and photo provided before arrival. Every visit ends with a documented photo log: what was found, what was set, what was installed. No other gate company in Venice we know of leaves that record on the kitchen counter.
We dispatch to all of Venice: the Walk Streets, Silver Triangle, Presidents Row, Oakwood, the Canals, and everything between Pacific and Lincoln. A live person answers the phone 24/7, not a voicemail queue. Call (213) 267-6777 and you will talk to a person who can schedule a measurement visit.
Our Gate Installation Services in Venice
Driveway Gate Installation
Venice driveway gates fall into two camps: automatic sliding gates where a swing gate will not fit, and swing gates on wider frontages. On the narrow lots east of Abbot Kinney, a slide gate is usually the only option that does not eat half the parking pad. We install both, and we size the operator to the gate weight, not the marketing brochure. A typical automatic driveway gate installation in Venice runs $3,800 to $8,500 complete.
Pedestrian Gate Installation
Most Venice pedestrian gates are the original 1920s-1940s wrought-iron jobs on beach bungalows, or newer powder-coated steel on the spec homes built since 2005. The old ones are almost always worth keeping, but the posts are almost always rot-weakened at grade. We set new galvanized posts, mount the original gate if it is sound, and add a magnetic latch and closer where needed. Pedestrian gate installation in Venice typically runs $900 to $2,400 including post work.
Sliding Gate Installation
Sliding gates are the default choice for Venice driveways under 12 feet wide, shared driveways, and any property where a swing gate would block the sidewalk or the neighbor’s access. The failure mode we see most in Venice is sand and salt grit working into the rack and pinion. We install slide gates with sealed bearing rollers and recommend a nylon rack over steel for beach-adjacent properties. A complete sliding gate installation in Venice runs $3,500 to $9,000 including operator and safety edges.
Security Gate Installation
For Venice properties that need actual access control, not just a barrier, we install gates with keypad entry, intercom, and vehicle detection loops. Several canal-side and Silver Triangle homes have dual gate systems: one street-facing, one canal-walkway-facing. We wire both to a single controller and document the setup so any future tech knows exactly how the system is configured. Security gate installation in Venice runs $4,500 to $12,000 depending on access control components.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Venice
We install and service operators from Ghost Controls, DoorKing, and Mighty Mule, among nine major automation brands. That means we are not locked into one manufacturer and we will not steer you toward a replacement motor just because a control board failed. We keep common parts for these brands stocked in our Los Angeles office, so a Venice dispatch does not have to wait on a part from a distributor across the county. If your existing operator is a brand we know, we can often replace a board or a limit switch same-visit and leave the motor in place.
Common Gate Installation Problems We See in Venice Homes
- Canal-side post failure below grade: Gate posts set near the original brick canal walkways in the Venice Canal Historic District often have mortar and post-base corrosion invisible from above. The gate looks plumb, but the post is structurally loose at the footing. We re-post before touching hinges or latches, because hinge work on a failing post is throwing money away.
- Swing gate hinge posts shearing at the base: Constant marine-layer moisture wicks into untreated post concrete and corrodes the steel inside. The gate drops, drags on the driveway, and eventually the post shears. We see this on Abbot Kinney-area bungalows every month.
- Salt-air control board failure: Operators near the beach often fail at the control board first, not the motor. Salt-laden air gets into the housing and corrodes the board traces even though the gearbox looks fine. When we install near the beach in Venice, we use sealed enclosures and dielectric grease on every connection.
- Slide gate rack and pinion grinding: Sand from the beach and grit from alley dust collect in the rack teeth. The gate gets noisy, then binds, then strips the pinion. We recommend nylon racks and sealed rollers for any Venice slide gate within a half mile of the ocean.
Pricing for Gate Installation in Venice, CA
Here is what Venice homeowners can expect to pay, written out the way we hand it to you before work starts:
| Gate Type | Typical Venice Price Range | What It Includes |
|---|---|---|
| Pedestrian gate (steel or wrought-iron, single leaf) | $900 - $2,400 | Post setting, gate, latch, closer, hardware |
| Driveway swing gate, manual | $2,200 - $4,500 | Posts, gate panel, hinges, hardware, finish |
| Driveway sliding gate, manual | $2,800 - $5,500 | Track or cantilever, gate panel, posts, rollers |
| Automatic driveway gate (operator, safety, controls) | $3,800 - $8,500 | Gate, operator, photo eyes, safety edges, keypad |
| Security gate with access control (keypad/intercom) | $4,500 - $12,000 | Gate, operator, keypad/intercom, vehicle detection, wiring |
Canal-side and beach-adjacent installs run toward the higher end because posts need deeper or reinforced footings, and we use marine-grade hardware and sealed controller enclosures. The price you are quoted is the price you pay. Written, in your hand, before the first hole is dug. Call (213) 267-6777 for a free measurement and written estimate.
We Also Serve Cities Near Venice
Vance Gate Repair dispatches to Venice daily, and we also cover Venice‘s neighboring communities: Santa Monica, Culver City, Beverly Hills, and Inglewood. If you are just outside Venice and need gate installation, call us. If you are in Venice and your gate post is leaning toward the street, call us faster.
Serving Venice, CA - Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Venice
A canal-side gate post in the Venice Canal Historic District almost always needs replacement before hinge work because the below-grade section of the post has corroded in constant ground moisture, and the post is loose at the footing even though it looks fine above the brick. A hinge repair on a loose post will fail within a year. Call (213) 267-6777 and we will dig down, show you the footing, and write the scope from what we actually find.
Yes, a sliding gate is the standard fix for narrow Venice driveways, especially on lots under 40 feet wide where a swing gate would block the sidewalk or the neighbor’s access. We measure the setback, check for the alley or side clearance the gate needs to slide into, and typically install a ground-track slide or a cantilever slide. Most narrow driveway slide gate installations in Venice run $3,500 to $7,000. Estimates are free.
In Venice’s salt air, an automatic gate operator lasts 5 to 8 years near the beach compared to 10 to 12 miles inland, with the control board typically failing first due to salt-air infiltration. Using a sealed enclosure and marine-grade connections extends that. If your operator is failing, we will show you the board and the reading before recommending repair or replacement. Call (213) 267-6777 for a diagnostic visit.
Yes, on Venice jobs we stage the old gate and new gate materials so vehicle and pedestrian access stays open through the final hour. On a shared driveway off Abbot Kinney, we kept vehicle access open by staging the rail and gate panel in the alley until the last hour, then swapped the gate in a single afternoon. We plan for access on every Venice install from the first measurement. Call (213) 267-6777 to schedule a site walk.
New automatic gates in Venice require UL 325-compliant entrapment protection: photo eyes or contact edges on the gate, proper force settings on the operator, and secondary entrapment protection on slide gates. We install all of that as standard on every automatic gate, no upsell. The safety package is in the written price before work starts. Call (213) 267-6777 for a quote that includes full entrapment protection.
Call Vance Gate Repair Venice for a Free Estimate
If you are in Venice and and thinking about a new gate, an automatic operator, or a post that is starting to lean, call (213) 267-6777. We will schedule a measurement visit, walk the site with you, and hand you a written price before any work begins. Under The Haven Standard, 365-Day Done Right Promise, and a photo record of every job, you will know exactly what you paid for and what was installed. A live person answers 24/7.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Venice’s gate installation and repair needs since 2014.
Gate Installation in Nearby Areas
