Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Angeles
A new gate installation in Los Angeles typically runs between $2,800 and $12,000, depending on whether you’re replacing a pedestrian gate, a double driveway gate, or a custom automated system with access control. We quote that price in writing before any work starts, so you know the number before we dig the first post hole. If you’re in Los Angeles and need a gate installed, want a written, line-item price today, call (213) 267-6777.
We work across Los Angeles daily – Silver Lake, Los Feliz, Venice, the Valley, and the canyon corridors up through Benedict Canyon and Laurel Canyon. That matters because a gate that works in Santa Monica’s salt air is not the same spec as one that’s appropriate for a sun-baked stucco pillar in Encino. Los Angeles has two environments fighting your gate at once: marine corrosion on the west side and UV degradation everywhere else. The hardware you choose has to answer both.
Why Vance Gate Repair Venice Is Los Angeles’s Preferred Gate Installation Company
Most homeowners in Los Angeles don’t call us because they woke up wanting a gate. They call because the old one seized, the operator died, or the LAFD sent a notice about fire-code compliance on their hillside access. By the time we arrive, they’ve usually read ten reviews and seen three conflicting estimates. That’s the customer we write for.
Every install we do in Los Angeles follows the same documentation habit Adrian Vance built in commercial access-control work starting in 2014: a written scope, a written price, and a photo record of what was found, what was set, and what was installed before we leave. You get the wiring diagram, the part numbers, the limit-switch settings. No future technician has to guess. No homeowner pays twice to rediscover the same problem.
We dispatch background-checked, uniformed technicians from our Los Angeles office. You’ll know the tech’s name and have their photo before they arrive. A live person answers the phone at (213) 267-6777 at any hour – no voicemail loop, no callback queue. And under the 365-Day Done Right Promise, if the installation isn’t right within one full year, we make it right at no additional charge.
Our Gate Installation Services in Los Angeles
We install every gate type you’ll find on Los Angeles properties, from 1920s Spanish Colonial pedestrian gates in Los Feliz to modern automated driveway systems on hillside lots in Bel Air. Here’s what we handle most often.
Driveway Gate
Driveway gates in Los Angeles are the single most requested installation we do. The city’s privacy culture and the geometry of the lots – long narrow driveways on the flats, switchback approaches in the hills – make an automated driveway gate the standard, not the exception, across much of the west side and canyon corridors. We install slide gates for tight setbacks and swing gates where the driveway has room for the arc. Every automated driveway gate we install includes a photo-eye safety beam and is documented for compliance with LAFD access requirements where hillside fire codes apply.
For a driveway gate installation in Los Angeles, expect $4,200-$9,500 for a steel swing gate with operator, track, and controls. Sliding driveway gates run $5,000-$12,000 depending on length and whether the track is cantilevered.
Pedestrian Gate
Lots of Los Angeles homes from the 1920s through 1940s still have the original ornamental wrought-iron pedestrian gate, and many have corroded hinges from decades of coastal fog. We install standalone pedestrian gates with keypad access, magnetic locks, or simple mechanical latches, and we set the posts in deep concrete with stainless hardware so the marine layer doesn’t eat the fixings within a few seasons. Pedestrian gate installation in Los Angeles typically runs $1,400-$4,200, with the higher end covering custom fabrication and access control.
Sliding Gate
Sliding gates dominate the flat lots and San Fernando Valley ranch tracts where driveway setbacks are too short for a swing arc. The challenge in Los Angeles is the salt air near the coast: galvanized rack-and-pinion track corrodes within 3-5 years in Venice and Pacific Palisades, which is why we spec stainless steel or powder-coated aluminum track for west-side installs. A sliding gate installation in Los Angeles runs $4,500-$11,000 depending on gate length, track type, and operator.
Swing Gate
Swing gates are the standard for hillside and estate properties in Los Angeles, especially where the driveway approach allows a wide arc. The failure we see most often is not the gate panel but the post footing: expansive clay soil heaves after winter rain and throws the post out of plumb, causing a sag no panel adjustment will fix. We set swing gate posts in deep concrete footings below the clay movement zone. Expect $3,800-$9,800 for a dual swing gate with operator and controls, depending on gate width and whether you need a Knox Box or Opticom override for LAFD compliance.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Los Angeles
We service nine major gate-automation brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, which means we work on whatever motor is already on your property instead of steering you toward a replacement. That’s the difference between a gate company that sells product and one that fixes your gate. For Los Angeles customers, we keep common parts in local stock – control boards, limit switches, photo-eye sensors – so most installs and repairs don’t wait on a shipment from a distributor.
Common Gate Installation Problems We See in Los Angeles Homes
Los Angeles gives us the same failure patterns year after year. Here’s what we find on installs and replacements across the city:
- Salt and marine-layer corrosion on west-side hardware. Galvanized hinge posts and steel track systems in Venice, Santa Monica, and Pacific Palisades start binding or flaking within three to five years of exposure. We spec stainless fixings and powder-coated aluminum where salt air is constant.
- UV-baked operator enclosures in stucco pillars. The 24V transformer or battery backup inside a non-ventilated pillar box in Encino or Sherman Oaks gets cooked by summer heat, leaving the gate stuck. We install operators with ventilated enclosures and heat-rated components for full-sun locations.
- Missing or incorrectly wired LAFD Knox Box overrides on hillside gates. This is the one that causes real trouble. A motorized gate on a hillside property in Bel Air, Laurel Canyon, Benedict Canyon, or the Hollywood Hills must have a working emergency override. We wire and document it on every install, because fire-code compliance is not an accessory – it’s part of the job.
- Heaving post footings from expansive clay soil. After winter rains, the clay under a gate post swells and shifts, throwing a swing gate out of plumb. No panel adjustment fixes that – the post has to be reset in a deeper footing below the movement zone.
Pricing for Gate Installation in Los Angeles, CA
Here are the numbers we quote most often in Los Angeles:
- Pedestrian gate installation: $1,400-$4,200
- Single swing driveway gate with operator: $3,800-$6,500
- Double swing driveway gate with operator: $5,500-$9,800
- Sliding driveway gate with track and operator: $4,500-$11,000
- Custom steel gate with access control and intercom: $7,000-$15,000+
These ranges include the gate panel, posts, hinges, operator where applicable, and all hardware. What moves the price in Los Angeles: gate width and weight, whether it’s steel, aluminum, or wood, whether you need a slide or swing configuration, and whether LAFD hillside compliance requires a Knox Box or Opticom override. The written price you get before work starts is the price you pay. No discovery billing, no end-of-job surprise. Call (213) 267-6777 and we’ll give you a number on the page, not over a phone call after three callbacks.
We Also Serve Cities Near Los Angeles
Our crews work throughout the Los Angeles basin every day. Along with the city of Los Angeles proper, we regularly install gates in Inglewood, Culver City, Torrance, and West Hollywood. If you’re in a neighboring city and want a written estimate for Gate Installation, call us – chances are we have a crew nearby this week.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Angeles
Yes. LAFD requires emergency access overrides on motorized gates serving hillside properties in the Very High Fire Hazard Severity Zone, which includes Bel Air, Benedict Canyon, Laurel Canyon, and much of the Hollywood Hills. We install and wire Knox Box key switches or Opticom strobe receivers on every hillside gate install and document the wiring for your fire-code record. If you’re installing a motorized driveway gate on a hillside lot in Los Angeles, call (213) 267-6777 before you buy hardware – we’ll tell you which override your property requires so the install passes inspection the first time.
Salt-laden marine air from the Pacific carries chloride that accelerates oxidation on bare steel and even on galvanized coatings. A galvanized hinge post in Venice lasts three to five years before the coating fails; the same post in North Hollywood might last a decade. That’s why we spec stainless steel hinge posts, stainless fixings, and powder-coated aluminum track for coastal Los Angeles installs. The upfront cost is higher, but the gate won’t seize or flake within a few seasons.
Operators installed inside unventilated stucco pillars in the San Fernando Valley see internal temperatures over 140 degrees in August; that kills transformers and battery backups. The fix is an operator with a ventilated or remote enclosure, or a direct-bury arm-style operator that stays outside the pillar entirely. We’ve installed LiftMaster and DoorKing units both ways in Los Angeles. Before you buy an operator, we’ll assess the pillar’s ventilation and tell you which unit will actually survive the summer. Call (213) 267-6777 and we’ll walk the site.
A double swing gate on a slope sags because the posts are losing plumb – the downhill post sits in clay that heaves and shifts after winter rain. No hinge adjustment fixes that. We remove the gate panel, dig out the post, set a new post in a deep concrete footing below the clay movement zone, and re-hang the gate square. On hillside lots in Los Angeles, we also confirm the LAFD-required Knox Box or Opticom override is wired and working before we call the job done. Every step gets documented in the photo record you keep.
Yes, as long as the gate has clear southern or western exposure and you’re not running a heavy solid-steel panel. Solar openers work well on lightweight aluminum or tube-steel gates – think chain-link or aluminum slat gates in Encino, Tarzana, or Van Nuys – where running conduit to the gate would mean trenching through a driveway or patio. In Los Angeles, our strong sun means a properly sized panel and battery bank will run a standard residential swing or slide gate year-round. The catch is the battery: it lives in the operator enclosure, and if that enclosure is in full sun with no ventilation, you’ll cook the battery every two or three summers. We can help you spec the right panel, battery, and enclosure for your lot. Call (213) 267-6777 for a free, written estimate.
Get a Written Gate Installation Estimate in Los Angeles
We don’t do verbal estimates and we don’t do surprise invoices. You call, we walk the site, we hand you a written price before any work starts. If you have an estimate from another company, bring it – we’ll review it at no cost as a free second opinion. Every Los Angeles install includes a documented photo record and the 365-Day Done Right Promise. Call (213) 267-6777 today and a live person will answer.
Written by Adrian Vance, Owner at Vance Gate Repair Venice, serving Los Angeles since 2014.
Gate Installation in Nearby Areas