Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tarzana
A new gate repair in Tarzana or full installation typically runs $4,800 to $18,500 depending on whether we’re hanging a welded steel double gate from scratch or automating an existing 1960s ranch gate with a new operator. Most installations take one to three days on site, and the written price is in your hand before any work starts. Call (213) 267-6777 for a free on-site measure and a line-item quote you can keep.
We work the flat tract streets north of Ventura Boulevard and the steep hillside canyons south of it, which means we know which side of Tarzana needs what. That matters more than it sounds.
Why Vance Gate Repair Venice Is Tarzana’s Preferred Gate Installation Company
Tarzana homeowners tend to call us after another company’s quote went vague or a red-tag notice landed on the gate. Adrian Vance built this company starting in 2014 out of commercial access-control work, where every install left behind wiring diagrams and photo logs. That habit carries into every residential gate we touch in Tarzana. Before we leave, you get a photographed record of what was found, what was set, and what was installed. No future technician has to guess, and you never pay twice to rediscover the same problem.
The Haven Standard governs every job: a written scope, a written flat price handed over before tools come out, and a photo-recorded file on every visit. Clause 1 is simple: have it in writing. If the install is not right, our 365-Day Done Right Promise means we make it right at no charge. No expiration date within that year, no argument.
A live person answers the phone at (213) 267-6777 around the clock. You’ll know the technician’s name and see a photo before they arrive, and that technician is background-checked and uniformed.
Our Gate Installation Services in Tarzana
Driveway Gate Installation
South of Ventura, Tarzana driveways climb. Long, winding, sloped approaches were built for estate lots between the late 1960s and early 2000s, and many still carry their original swing or slide gates. We fabricate and hang new steel gates on those drives, set deeper hinge post footings for slope-rated loads, and size operators for the actual weight and travel of the gate. North of the Boulevard, the 1950s and 1970s ranch homes usually need a simpler, cleaner double-swing or single-slide install across a flat apron.
Every driveway gate we install in Tarzana gets a written price first. No surprises when the invoice arrives.
Double Gate Installation
Double driveway gates are the most common request in Tarzana’s larger-lot neighborhoods, and for good reason: a wider opening, less swing arc into the street, and a more balanced load across two posts. We build matched pairs with center stops, drop rods, and operators that stay synchronized. The 110°F summer heat in Tarzana is real, so we don’t undersize motors on double gates. Heat kills undersized motors faster than any other factor in the Valley. A typical double swing gate install in Tarzana runs $7,500 to $16,000 depending on materials and automation.
Sliding Gate Installation
On steep Tarzana hillside driveways, a sliding gate often makes more sense than a swing gate because it doesn’t fight grade when it opens. But slide gates here face a particular enemy: Santa Ana winds. Fine dust and debris blast into the track, the wheel bearings, and the operator housing. We install slide gates with sealed bearing trucks, brush guards on the track, and protected operator enclosures so the first big wind event doesn’t leave the gate grinding. The flat stretches north of Ventura still see slide gate installs, mostly on narrower lots where a swing gate would arc into a parked car.
Swing Gate Installation
Swing gates work beautifully on Tarzana’s flat-valley streets and on hillside lots with enough setback to let the leaf travel without dragging. We set posts in concrete, align hinges to load spec, and match the operator to the gate’s actual weight. A custom ornamental swing gate in Tarzana, with powder-coat finish and basic automation, generally runs $5,500 to $12,000. Add a camera intercom and keypad entry and you’re closer to $9,000 to $18,000 depending on the access-control package.
Security Gate Installation
South of Ventura Boulevard, a security gate is not a convenience. It’s the second layer between a hillside estate and a canyon road that sees very little traffic after dark. We install security gates with matched access control: vehicle detection loops, camera intercoms, keypads, and phone-based entry where the homeowner wants it. In the VHFHSZ hills, every automated security gate also needs the fire-access hardware we’ll cover below. North of Ventura, security gates tend toward cleaner, lower-profile steel designs paired with a keypad and a photo-eye.
This page is our Gate Installation service page written specifically for Tarzana. For more on what it means to work with us across the broader area, see our Gate Installation in Tarzana hub.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tarzana
We work on LiftMaster, FAAC, BFT, Mighty Mule, and the other major automation brands, and we never steer a Tarzana customer toward replacing a gate motor that’s repairable. The brand on the rail matters less than whether the arm bracket is intact and the limit switches are set to actual travel. We keep common parts and boards in the truck so a Tarzana install or replacement motor doesn’t stall waiting on a ground-shipped component. If whatever is on your gate is older but sound, we’ll tell you that and hand you a written price to keep it running.
Common Gate Installation Problems We See in Tarzana Homes
- Red-tagged new installs over missing Knox Box hardware. In Tarzana’s hillside pockets south of Ventura, a gate that passed a visual inspection elsewhere gets flagged because the automation lacks LAFD-approved rapid-access hardware. We plan for this before the first hole is dug, not after the inspector leaves.
- Operator burnout at the two-summer mark. Tarzana regularly hits 105 to 110°F, and that heat warps aluminum and wood panels while cooking circuit boards and rubber seals. We see operators dead in 24 months on gates where the motor was sized to the gate’s weight but not to the heat load. Our sizing accounts for both.
- Slide track jamming from Santa Ana debris. Fine wind-driven grit gets into the wheel trucks, the rack and pinion, and the loop detector channel. We install sealed bearings and protected channels, and we align the track to grade so the first wind event doesn’t leave the gate grinding sideways.
- 1990s estate gates with no fire-access hardware and no documentation. Many original Tarzana hillside gates pre-date strict VHFHSZ enforcement. We retrofit Knox Box key switches or approved rapid-access systems, and we document every limit switch reading and photo before we call it done.
Pricing for Gate Installation in Tarzana, CA
A single driveway gate with basic steel construction and a chain-drive operator in Tarzana runs $4,800 to $8,500. A custom ornamental double swing gate with powder-coat finish, a LiftMaster or FAAC operator, matched photocells, and a keypad entry system lands between $9,000 and $16,000. A full security gate package with camera intercom, vehicle detection, and phone-based entry starts around $12,000 and can exceed $20,000 on estate lots south of Ventura.
What moves the number: gate weight and width, the grade of the driveway, code-required fire-access hardware in hillside zones, and whether we’re replacing posts or reusing existing footings. The written quote you get accounts for all of it before work begins. Estimates are free, and the price we quote is the price you pay. We’ll also review any written estimate from another company at no cost.
We Also Serve Cities Near Tarzana
Our crews serve Tarzana and the surrounding area, including Encino, Sherman Oaks, Van Nuys, and Studio City. Dispatch and scheduling are coordinated from our Los Angeles office, and crews work these neighborhoods every week.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tarzana
If your property sits south of Ventura Boulevard in a hillside pocket within the Very High Fire Hazard Severity Zone, yes. LA requires LAFD-approved Knox Box key switches or an approved rapid-access system on every automated driveway gate. This is not optional there, and inspectors do red-tag new installs that skip it. North of Ventura in the flat-valley tract areas, the requirement generally does not apply unless your specific street is inside the mapped zone. Call (213) 267-6777 and we’ll check your address against the current map before we quote.
Slide gates usually work better on steep or winding Tarzana drives because the gate doesn’t fight the grade when it opens and you don’t need the full swing arc clear of the slope. But a slide gate needs a straight enough run for the track, so on tight switchback driveways off Tarzana Drive or Mulholland-area canyons, a properly engineered swing gate with offset hinges is sometimes the only workable option. We’ll assess the grade, setback, and gate weight and recommend whichever design will actually hold up, not whichever is easier to install. Estimates are free.
Yes, if the operator is undersized for the heat load, not just the gate weight. Tarzana regularly records 105 to 110°F during summer events, and that thermal load burns out undersized motors, warps panels, and degrades seals faster than manufacturers’ rated lifespans. We size every operator in Tarzana for the actual weight, the travel, and the valley heat, which is why our installs consistently outlast the two-summer burnout we see on other companies’ work. For a written quote sized to your gate, call (213) 267-6777.
Yes, and we do it regularly on Tarzana hillside gates where running line voltage to the gate would mean trenching hundreds of feet through slope and scrub. Solar operators work well in Tarzana because the Valley sunlight is strong and consistent. The trade-off is battery capacity and heat, which is why we spec solar systems with shade-aware panel positioning and sealed battery enclosures rated for the 110°F days. A solar operator install in Tarzana typically runs $1,800 to $3,500 added to the gate itself. Call (213) 267-6777 for an exact figure.
The fix usually means retrofitting LAFD-approved Knox Box key switches or an alternate rapid-access system into the existing automation, then calling for reinspection. We see this exact pattern on Tarzana hillside gates constantly: a permit pull or a resale inspection flags the gate because a 1990s original operator never had fire-access hardware installed. We’ll document what’s missing, install the compliant hardware, and walk the reinspection with photos of the wiring and the switch placement. Call (213) 267-6777 and we’ll come assess it, usually same day.
Every Tarzana gate install ends with the same thing: a written price you saw before work started and a photo-logged record of what we left behind. Call (213) 267-6777 any hour, day or night, and a person answers. We’ll schedule a free measure, price it in writing, and build you a gate that runs quietly through Tarzana’s hottest summers and steepest drives.
Written by Adrian Vance, Owner at Vance Gate Repair Venice, serving Tarzana since 2014.