Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Van Nuys, CA
Access control on a Van Nuys gate fails fastest when heat and aging concrete work together. We replace keypads, card readers, phone entry boards, and video intercoms that stop reading in the Valley’s 105°F-112°F summer days, and we weld hinges, posts, and rails on gates that have shifted on settled postwar slabs. Call (213) 267-6777 for a written price before anyone touches the gate.
Why Van Nuys Homes Are Different
Van Nuys sits at the center of the San Fernando Valley heat bowl. Summer days routinely reach 105°F-112°F, and that sustained heat changes metal. Steel and aluminum driveway gates expand, bind against frames, and throw tracks out of alignment. UV at that intensity also bakes automatic gate operator boards and cracks rubber seals long before the same part would fail in Sherman Oaks or Studio City, just a few miles south.
The housing stock compounds the problem. Van Nuys is dominated by 1950s-1970s single-family tract homes and two-story apartment buildings, nearly all retrofitted with automatic sliding or swing driveway gates years after the original construction. Those gates sit on concrete and asphalt that has settled unevenly over fifty or sixty years. A gate that worked fine when the slab was level now drags, binds, and fights the motor every cycle. In the rear-alley neighborhoods east of Van Nuys Blvd, trash-truck weight and heat-softened asphalt make alley gate posts lean inward over time. It’s a slow creep we see constantly on Van Nuys service calls, and it’s the reason a post that looks fine from the street is often six degrees out of plumb from the alley side.
Our Main Van Nuys Services
These are the three gate services Van Nuys homeowners call about most often.
Gate Repair in Van Nuys
We repair sliding and swing gates that have stopped moving, started dragging, or closed on a car. In Van Nuys, most repair calls trace back to thermal expansion from summer heat or a post that has shifted on settled concrete. We diagnose on site, write the price, and fix the problem the same visit whenever parts are on the truck. Gate Repair in Van Nuys covers hinges, rollers, tracks, and frame alignment.
Gate Installation in Van Nuys
New gate installation in Van Nuys means working with the slab you have, not the slab the gate manufacturer assumes. We measure the driveway, check the concrete for settlement and cracking, and spec a gate that will clear the existing grade. You get a written proposal with the gate, the motor, and the labor separated line by line. Gate Installation in Van Nuys covers the full process.
Gate Motor & Opener in Van Nuys
Motors on Van Nuys gates die faster than the gate itself, mostly from heat exposure and years of fighting a misaligned track. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If the motor can be repaired, we repair it and document the settings. If not, the replacement price is written before we order a part. Gate Motor & Opener in Van Nuys has the details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Van Nuys
Gate access control in Van Nuys fails predictably: keypads crack in the heat, card readers lose sensitivity after years of direct sun, and phone entry boards stop working after a string of 110°F days. On the 1950s-1970s tract homes that make up most of Van Nuys, the access system was almost always added decades after the house, which means wiring runs through stucco, across settled concrete, and around gate posts that have moved. We repair the existing system rather than steering you toward a replacement, and we leave a written record of every setting and a photo log of the work. If you want the full story on what we handle, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad works intermittently, or some digits don’t register at all.
What it costs in Van Nuys
Keypad replacement in Van Nuys typically runs $225-$405, and we carry common keypads on the truck.
How we do it
We test the keypad output at the control board, confirm whether the keypad or the wiring is the failure point, replace the part, and photograph the new programming.
Phone Entry
Signs you need it
Visitors call the gate line and get no buzz-through, or the call drops before the gate opens.
What it costs in Van Nuys
Phone entry repair in Van Nuys runs $355-$590, depending on whether the board, the power supply, or the antenna is the fault.
How we do it
We check the carrier signal strength, test the relay at the board, replace the failed component, and document the new configuration in writing.
Video Intercom
Signs you need it
The monitor shows a black screen, or the feed drops every time the gate moves.
What it costs in Van Nuys
Video intercom repair in Van Nuys runs $450-$950 for most failures, with the higher end covering camera replacement on a masonry post.
How we do it
We trace the video feed from the camera to the indoor monitor, isolate the failed component, and replace only what’s dead.
What Gate Access Control Costs in Van Nuys
| Item | Typical range in Van Nuys |
|---|---|
| Keypad replacement | $225-$405 |
| Phone entry system repair | $355-$590 |
| Video intercom repair | $450-$950 |
Can you work on the access system already on my Van Nuys gate?
Yes. We repair existing keypads, card readers, phone entry boards, and video intercoms from DoorKing, Elite, Ghost Controls, and other major brands. We do not steer you toward a replacement unless the existing part is beyond repair. Call (213) 267-6777 with the brand name and what the system is doing.
Do you run new wiring for access control in Van Nuys?
We do, and in Van Nuys that often means running conduit across settled concrete or through a stucco wall where the original install cut corners. The wiring run is quoted separately from the access component, so the written price tells you exactly what you’re paying for.
Gate Parts & Welding in Van Nuys
Gate parts and welding in Van Nuys means working on steel and aluminum that has been baked by Valley heat for decades. Hinges wear out twice as fast on a gate that drags against a heat-expanded frame. Posts in rear-alley neighborhoods lean inward from years of trash-truck vibration and heat-softened asphalt. We replace the part that failed, weld what cracked, and leave a photo record of every seam and every new component. For the full scope of what we cover, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags on the latch side, or the hinge creaks and the gate doesn’t close squarely.
What it costs in Van Nuys
Hinge replacement in Van Nuys runs $295-$485 per hinge set, including welding if the old hinge points are cracked.
How we do it
We cut off the old hinges, grind the post clean, weld on new hinge barrels, and photograph the finished welds.
Post Replacement
Signs you need it
The post leans visibly from the driveway or the alley side, or the gate no longer latches because the post has moved.
What it costs in Van Nuys
Post replacement in Van Nuys runs $600-$1,500, depending on post size, concrete depth, and whether we’re cutting into a driveway slab or an alley apron.
How we do it
We saw-cut the concrete around the old post, pull it, set a new post plumb in fresh concrete, and remount the gate after the concrete cures.
Gate Rollers
Signs you need it
The gate scrapes or shudders when it slides, and the track shows flat spots or worn roller wheels.
What it costs in Van Nuys
Roller replacement in Van Nuys runs $200-$490, including new rollers, bearing checks, and track cleaning.
How we do it
We lift the gate off the track, replace the roller assemblies, adjust the height so the gate runs level, and photograph the final alignment.
What Gate Parts & Welding Costs in Van Nuys
| Item | Typical range in Van Nuys |
|---|---|
| Hinge replacement | $295-$485 per set |
| Post replacement | $600-$1,500 |
| Gate roller replacement | $200-$490 |
Can you weld an aluminum gate in Van Nuys?
Yes, we weld aluminum and steel on site. Aluminum welding requires different equipment and filler than steel, and we carry both. The weld is photographed and included in your job record. Call (213) 267-6777 if the crack is spreading.
How long does post replacement take on a Van Nuys driveway?
Most post replacements take one day for the concrete work, with the gate remounted the next day once the concrete has cured enough to hold the weight. We write the schedule on the quote so you know exactly when the gate goes back on.
Brands We Service in Van Nuys
We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems in Van Nuys, along with five other major automation brands. We keep common control boards, keypads, and safety edges in local stock, which means most access repairs happen in one visit. See our brands for the full list.
Pricing for Gate Repair in Van Nuys, CA
| Service | Typical range in Van Nuys |
|---|---|
| Keypad replacement | $225-$405 |
| Phone entry system repair | $355-$590 |
| Video intercom repair | $450-$950 |
| Hinge replacement | $295-$485 per set |
| Post replacement | $600-$1,500 |
| Gate roller replacement | $200-$490 |
In Van Nuys, two things push a gate repair price up: settled concrete that makes alignment work harder, and heat damage that means a component failed earlier than it would have elsewhere. Every price is written before any work starts, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Van Nuys
We cover the full Van Nuys grid, from the rear-alley neighborhoods east of Van Nuys Blvd to the apartment complexes off Victory and Sepulveda. Most Van Nuys calls get a same-day or next-day visit, depending on the part.
- The Lakes
- Van Nuys Airport corridor
- Central Van Nuys
- Valley Glen
- Neighborhoods along the 405 corridor
Service Area - Cities Near Van Nuys
We also serve the communities around Van Nuys. If you’re in Sherman Oaks, CA, Studio City, CA, North Hollywood, CA, or Encino, CA, the same written-price promise and documented work record apply.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Van Nuys
Most Van Nuys calls get a same-day or next-day visit, and a live person answers the phone 24 hours a day. If the gate is stuck open or stuck closed, tell the dispatcher and we’ll prioritize the call. Call (213) 267-6777 for current availability.
Most gate repairs and part replacements don’t require a permit, but some full installations do, depending on the size, height, and whether the gate is on an alley. We check the current City of Los Angeles requirements for your specific address before the work starts and note any permit on the written quote.
We do. Van Nuys has a high concentration of two-story apartment buildings and gated communities, and we work with property managers and HOA boards. The written price and photo record matter even more on shared property, and we provide both on every visit.
If your Van Nuys gate is down, call (213) 267-6777 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Van Nuys Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.