Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate access control work in Inglewood tends to be driven by two forces: event-night crowds near the stadium corridor and a wave of upgrades on flipped post-war bungalows. Gate parts and welding follow the same pattern, because the housing stock here is full of aging wrought-iron frames that the coastal air corrodes faster than people expect. We dispatch to Inglewood daily from our Los Angeles office, and the written price is in your hand before any work starts. Call (213) 267-6777 when a gate stops responding or a hinge lets go.
Why Inglewood Homes Are Different
Most Inglewood residential gates are mounted on post-WWII single-family homes built between the late 1940s and early 1970s. The pilasters holding those gates are usually concrete block or brick, and after five or six decades of marine-layer moisture they hold hardware less reliably than they once did. Inglewood sits four to five miles from the coast at El Segundo, and the persistent morning marine layer deposits salt-laden moisture on exposed metal daily. Wrought-iron frames rust through at the bottom rail, hinge pins seize, and motor vent openings facing the onshore breeze pull in damp air that shortens component life compared to inland cities like Covina.
The second factor is the event corridor itself. SoFi Stadium, the Kia Forum, and the YouTube Theater concentrate foot and vehicle traffic onto residential streets in a way few LA County suburbs experience. Game and concert nights bring outsiders who bump gates, force them open, or tailgate through a closing cycle. We schedule post-event follow-up windows for blocks off Prairie Avenue and Century Boulevard because Monday call volume reliably spikes after sold-out weekends. Bent bottom rollers, limit-switch drift from forced activations, and motor strain are the standard findings.
Our Main Inglewood Services
Two services dominate our Inglewood call log, but three others have their own dedicated pages with full pricing and job detail. Start here if you know which problem you have.
Gate Repair in Inglewood
A gate that drags, squeals, or refuses to open on an Inglewood rental or flipped bungalow usually has a mechanical problem we can isolate in one visit. The coastal corrosion on hinges and the event-night abuse on operators make this city’s repair calls heavier on welded frames and track alignment than inland work. We name the fix, write the price, and photograph everything before we leave. Gate Repair in Inglewood
Gate Installation in Inglewood
Installing a new gate on a narrow Inglewood driveway means measuring the actual track run before ordering anything. Many single-car driveways here were never laid out for motorized hardware, and the post-SoFi renovation wave has pushed slide-gate retrofits onto lots that need custom rail placement. We measure free, quote in writing, and install with the operator matched to the gate weight. Gate Installation in Inglewood
Gate Motor & Opener in Inglewood
When an operator runs but the gate doesn’t move, or the motor hums and trips, Inglewood’s salt air has usually worked its way into the board or the capacitor. The marine layer shortens motor life here, and event-night forced activations knock limit switches out of calibration. We service LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, with the brand name on the written quote. Gate Motor & Opener in Inglewood
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Inglewood
Access control on an Inglewood driveway gate means the keypad, intercom, card reader, or phone-entry hardware that tells the operator who is allowed through. On event nights near SoFi Stadium, the problem is outsiders: a gate that won’t authenticate creates a queue of cars on the street, and people get impatient and force the gate. On flipped bungalows, the problem is integration: a new slide-gate system retrofitted onto a driveway that was never engineered for motorized hardware often arrives with mismatched access devices. Gate Access Control work here means matching the access device to the operator, then documenting every setting so the next technician doesn’t have to rediscover the programming.
Keypad Entry
Signs you need it
The keypad reads a valid code intermittently, or the buttons have gone soft from years of direct sun and salt air.
What it costs in Inglewood
A keypad replacement in Inglewood typically runs $225 to $475, including the new keypad, wiring check, and programming into your existing operator.
How we do it
We remove the old keypad, check the wiring run for corrosion, mount the new unit, program the codes, and photograph the final setting before we leave.
Phone Entry
Signs you need it
Callers ring through but the gate won’t release, or the system drops calls when the operator draws power.
What it costs in Inglewood
Phone-entry troubleshooting and repair in Inglewood runs $350 to $700, depending on whether the cellular module, relay board, or antenna needs replacement.
How we do it
We test the relay output with a meter, verify the SIM and signal, swap the failed component, and leave you a written record of the part number we installed.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad replacement | $225 - $475 |
| Phone-entry repair | $350 - $700 |
| Video intercom install | $450 - $900 |
Can you replace just the keypad, or does the whole operator need to go?
In most cases, just the keypad. We replace keypads as standalone units and program them into the existing operator, regardless of brand. The written quote shows the keypad cost separately from any other work.
Why does my keypad work all week and fail on game nights?
Event-night power draw in Inglewood neighborhoods near the stadium can cause voltage dips, and older keypads lose their programming when voltage drops. A new keypad with non-volatile memory usually ends the problem. Call (213) 267-6777 and we’ll test it.
Gate Parts & Welding in Inglewood
Parts and welding work in Inglewood is dominated by the marine layer’s effect on wrought iron. Bottom rails rust through at the gate’s lowest corner, hinge pins seize inside the barrel, and the post-war pilasters crumble where the bracket anchors sit. The second signature Inglewood problem is event-night damage: bent rollers, cracked welds at the hinge, and gate leaves knocked out of square. For a full breakdown of what we stock and fabricate, see our Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
The gate sags and scrapes, or the hinge pin has visible rust scaling and the leaf doesn’t swing square.
What it costs in Inglewood
Hinge replacement in Inglewood typically runs $275 to $575 per pair, including new heavy-duty hinges, welding if needed, and realignment.
How we do it
We support the gate leaf, cut or unbolt the old hinges, mount and weld the new ones, and check the swing before photographing the result.
Gate Rollers
Signs you need it
The gate jerks or sticks along the track, and the rollers show flat spots from cars nudging the gate open.
What it costs in Inglewood
Gate roller replacement in Inglewood runs $325 to $625, including the rollers, track inspection, and bearing service on the wheels.
How we do it
We lift the gate off the track, replace the rollers and bearings, clean the rail, and reset the travel stops before documenting the work.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement (per pair) | $275 - $575 |
| Gate roller replacement | $325 - $625 |
| Post replacement | $750 - $1,400 |
Can you weld a wrought-iron gate back together, or does it need to be replaced?
We weld cracked wrought iron regularly. If the steel is sound and the rust isn’t through the structural member, welding restores the gate. We photograph the weld before and after, and the written price covers the whole job.
How long does a hinge replacement take?
Most hinge replacements on Inglewood swing gates are done in two to four hours, including welding and realignment. If the post is crumbling, the job extends to post replacement. Call (213) 267-6777 for a written price.
Brands We Service in Inglewood
We service Viking, Ghost Controls, DoorKing, and Elite operators on Inglewood gates, along with the rest of our nine-brand coverage list. Parts for these systems are stocked in our Los Angeles office and arrive on the truck the day of your appointment. Our brands page lists the full lineup.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Keypad replacement | $225 - $475 |
| Phone-entry repair | $350 - $700 |
| Video intercom install | $450 - $900 |
| Hinge replacement (per pair) | $275 - $575 |
| Gate roller replacement | $325 - $625 |
| Post replacement | $750 - $1,400 |
| Weld repair (per joint) | $150 - $350 |
| Gate realignment | $200 - $400 |
Prices in Inglewood push toward the high end when the marine layer has eaten through a gate post and the operator needs remounting, or when event-night damage has bent multiple track components. The written price we hand you before work starts is the price you pay, no adjustments after the fact.
Neighborhoods We Serve in Inglewood
We work across all of Inglewood, from the tree streets near Centinela to the blocks off Arbor Vitae and the renovation-heavy pockets around Rogers Park.
- North Inglewood
- Morningside Park
- Rogers Park
- Century Boulevard corridor
- Arbor Vitae area
Response time across Inglewood is typically same-day or next-day depending on the season and event schedule.
Service Area - Cities Near Inglewood
We dispatch to Inglewood daily and also serve the surrounding cities. If you’re in Culver City, CA, Los Angeles, CA, Venice, CA, or Beverly Hills, CA, our crews cover those neighborhoods with the same written-price standard on every job.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
Yes. We schedule post-event follow-up appointments for blocks off Prairie Avenue and Century Boulevard because game and concert nights cause a predictable spike in gate strikes, bent rollers, and forced-activation damage. Same-day dispatch to the stadium corridor is available when we have a crew free.
Most gate repairs do not require a permit, but replacing a gate or altering the driveway run can trigger city review depending on the scope. We can tell you what’s needed on your specific property during the free estimate. We don’t start work until the written scope is agreed.
Yes. Our live phone line is answered 24/7, and weekend dispatch to Inglewood is available. Event weekends fill quickly, so calling early Monday morning gets the fastest scheduling. The price is always written before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.