Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate access control in Los Angeles means more than keypads and remotes. It means restoring the override systems the fire department requires on the hillside streets, and keeping intercom wiring alive through heat that cooks electronics inside stucco pillars. We handle gate access control and gate parts and welding for every era of LA housing, from 1920s Los Feliz wrought iron to recent Hollywood Hills motorized slide gates. Call (213) 267-6777 when you want the written price before anyone touches your gate.
Why Los Angeles Homes Are Different
Los Angeles has one of the highest concentrations of automated driveway gates in the country, and the repair work here splits into two distinct worlds. The flat grid west of the 405 and through the San Fernando Valley holds postwar ranch tracts with sliding aluminum and chain-link driveway gates, many running aging Linear or Mighty Mule operators. The hills are another job entirely. In Hollywood Hills, Bel Air, Laurel Canyon, and Benedict Canyon, LAFD emergency-access mandates require Knox Box overrides or Opticom systems on motorized gates. A repair tech who only fixes the mechanical drive and ignores the dead override battery has left a fire-code violation standing. UV is relentless year-round here: it cracks wood gates, fades plastic keypad housings, and degrades operator enclosures faster than almost anywhere in the country. Coastal salt air from Venice up to Pacific Palisades accelerates rust on iron hinges and steel track. Add in expansive clay soil that shifts with winter rain and heaves posts out of plumb, and Los Angeles gate work is rarely a one-part fix. When we quote, we’re pricing what this specific street and this era of construction actually requires.
Our Main Los Angeles Services
These are the three service lines Los Angeles homeowners call about most, each with its own full page.
Gate Repair in Los Angeles
In Silver Lake and Los Feliz, we’re often rebuilding 1930s and 1940s ornamental pedestrian gates where the original hinges have ovalized and the latch post leans after decades of soil movement. In Encino and Sherman Oaks, the repair is usually a sliding gate off its track or a motor that stopped mid-travel. Our technicians document every adjustment, photograph the finished position, and hand you the written record before leaving.
Gate Installation in Los Angeles
New installations in Los Angeles almost always involve more than the gate itself. Hillside properties need the LAFD-compliant override hardware integrated from day one. Coastal homes need stainless or heavily coated hardware specified from the start, not swapped in later. We measure, spec the hardware for the actual exposure, and provide a written price for the complete job before any material is ordered.
Gate Installation in Los Angeles
Gate Motor & Opener in Los Angeles
Most Los Angeles motor failures come down to two local causes: heat-degraded circuit boards inside non-ventilated pillars, and salt corrosion along the coast. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair the operator already on the property rather than steering you toward a replacement you did not ask for.
Gate Motor & Opener in Los Angeles
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Los Angeles
Gate access control in Los Angeles is the electronics layer that decides who gets in: keypads, remotes, phone entry, card readers, and video intercom. On hillside properties in the Hollywood Hills and Bel Air, it also includes the Knox Box or Opticom override hardware LAFD requires for emergency access; restoring that compliance feature is part of the job, not a footnote. This is what we cover under Gate Access Control.
Keypad Entry
Signs you need it
Buttons stop responding reliably, the housing is sun-cracked, or codes reset on their own after power flickers.
What it costs in Los Angeles
Keypad installation or replacement in Los Angeles typically runs $220-$500, and wireless keypad replacement is usually $150-$300.
How we do it
We test the wiring run first, confirm the keypad is actually the failed component, replace it with a compatible unit, reprogram codes, and photograph the completed wiring.
Video Intercom
Signs you need it
The screen shows a black frame, audio cuts out, or call buttons fail to ring the interior station while the gate still opens from the remote.
What it costs in Los Angeles
Gate video intercom installation and replacement in Los Angeles runs $1,400-$3,200 depending on single-family versus multi-unit wiring.
How we do it
We trace the cable run, identify whether the camera, power supply, or monitor has failed, replace the failed component, and document the wiring path for the next service visit.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad installation or replacement | $220-$500 |
| Wireless keypad replacement | $150-$300 |
| Gate video intercom installation and replacement | $1,400-$3,200 |
Does LAFD require a Knox Box on every Los Angeles gate?
No. Knox Box or Opticom override requirements apply to motorized gates on hillside properties in designated fire hazard zones, including much of Hollywood Hills, Bel Air, Laurel Canyon, and Benedict Canyon. We verify your specific address’s requirement and document compliance during the visit. Call (213) 267-6777 to confirm your gate.
Can you repair just the intercom without replacing the whole gate system?
Yes. We replace the failed component: camera, monitor, power supply, or cable run. The written price lists exactly the part number and labor before work starts, so you’re not quoted one thing and billed another.
Gate Parts & Welding in Los Angeles
Gate parts and welding in Los Angeles means matching new hardware to gates built in 1926 and 2016, often on the same street, then addressing what the local climate does to each. UV and coastal salt air wear hinges and rollers quickly, and clay soil movement racks posts out of square after winter rain. Our Gate Parts & Welding work always starts with a written price and ends with a photographed record of the repair.
Hinge Replacement
Signs you need it
The gate sags and drags at the latch edge, the hinges creak under load, or the gate leaf has begun scraping the ground on one side.
What it costs in Los Angeles
Hinge replacement in Los Angeles typically runs $280-$850 per hinge, depending on whether we’re welding to a solid post or repairing a failing weld as well.
How we do it
We measure the gate’s camber and weight, cut out the failed hinge, weld or bolt in a matched replacement, confirm the gate is level and square, and photograph the finished weld.
Gate Rollers
Signs you need it
The gate shudders sliding open or closed, audible grinding comes from the track wheels, or the gate has jumped the track more than once this season.
What it costs in Los Angeles
Gate roller replacement in Los Angeles runs $400-$900 for a full set replacement when the track itself is still in good shape.
How we do it
We pull the gate off the track, remove the seized or flattened rollers, install matched wheels rated for the actual gate weight, and set the travel so it tracks straight.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement (per hinge) | $280-$850 |
| Gate roller replacement (full set) | $400-$900 |
| On-site steel welding | $120-$185/hr |
Can you weld a cracked ornamental gate in Los Angeles without removing it?
In most cases yes, we weld in place. If the crack is at a load-bearing point or the surrounding metal is fatigued, removal may be safer. We’ll tell you before touching the gate and the price is already in writing.
Do you stock parts locally or order everything in?
We carry common hinges, rollers, and welding consumables on the truck. Uncommon castings or custom forged pieces take 3-5 business days. You’ll know the lead time and the part price before you approve anything.
Brands We Service in Los Angeles
We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems, plus LiftMaster, FAAC, BFT, Linear, and Viking. Our trucks carry common parts for these brands so a simple opener repair is often completed on the first visit. See our brands for the full list.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Gate service call | $79-$129 |
| Gate repair (per hour) | $120-$185 |
| Keypad installation or replacement | $220-$500 |
| Wireless keypad replacement | $150-$300 |
| Gate video intercom installation and replacement | $1,400-$3,200 |
| Hinge replacement (per hinge) | $280-$850 |
| Gate roller replacement (full set) | $400-$900 |
| On-site steel welding | $120-$185/hr |
Pricing in Los Angeles shifts with three local factors: hillside access that requires LAFD override hardware documentation, coastal salt corrosion that turns a simple hinge swap into a weld repair, and older gates that need custom-fabricated parts rather than off-the-shelf pieces. Whatever the number, it’s written and handed to you before any work begins.
Neighborhoods We Serve in Los Angeles
We dispatch across Los Angeles, with techs regularly working these areas:
- Hollywood Hills & Laurel Canyon
- Bel Air & Benedict Canyon
- Silver Lake & Los Feliz
- Encino & the San Fernando Valley
- Venice & the coastal Westside
Response time across the metro area is typically same-day for emergency access-control failures and next-day for scheduled parts and welding work.
Service Area - Cities Near Los Angeles
Our Los Angeles office dispatches locally, and we also serve Inglewood, CA, Culver City, CA, Torrance, CA, and West Hollywood, CA. A live person answers (213) 267-6777 around the clock.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Repairs and like-for-like part replacements generally do not require a permit. New gate installations, especially on hillside properties where LAFD override requirements apply, may need city review. We can tell you what your specific address triggers before any work starts. Call (213) 267-6777 with your street and we’ll check.
For access-control failures, stuck gates, or safety-edge problems, yes: emergency dispatch is available every day of the year, including nights and weekends. A live person answers (213) 267-6777 and schedules the technician directly, no voicemail loop.
Yes. Most Los Angeles gate systems we service were installed by other companies, some of which are no longer in business. We work on what’s on the property, across nine major automation brands, and provide a written price before starting.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.