Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Santa Monica, CA
Gate access control in Santa Monica usually comes down to one thing: salt air getting into electronics and connections that were never sealed against it. We replace corroded keypads, weather-torn card readers, and oxidized wiring on gates within a few blocks of the ocean more than anywhere else we work in the metro area. Call (213) 267-6777 and we’ll give you a written price before any work starts.
Why Santa Monica Homes Are Different
The city’s roughly 8 square miles sit directly against the Pacific, and the marine layer pushes salt-laden moisture inland year-round. That means hardware on a Santa Monica gate corrodes faster than identical hardware in Culver City or Beverly Hills, a few miles east. Hinges rust through, weld points on lower rails fail, and exposed bolts seize. On properties two to three blocks from Ocean Avenue, we regularly see rust-through at welds after five to seven years, which would be unusual anywhere inland.
The housing stock splits sharply. Pre-WWII beach bungalows and 1960s dingbat apartment buildings sit alongside large estates north of Montana Avenue. We may replace a corroded pedestrian gate at a rent-controlled courtyard apartment in the morning, then diagnose a sophisticated automated vehicular gate on a North of Montana estate the same afternoon. Santa Monica’s independent Building & Safety Division also issues its own permits for automated gate operator work, separate from LA City, and inspectors there expect marine-grade hardware on any exposed component.
Our Main Santa Monica Services
Most Santa Monica homeowners reach us for one of three reasons: a gate that stopped working, a gate that needs replacing, or a motor that quit responding. Here’s how each one works in this city.
Gate Repair in Santa Monica
Most repair calls here involve rusted hinges, sagging gate frames, or control boards that got wet from fog and salt exposure. We start by documenting what we find with photos, then hand you a written price before we touch a tool. Gate Repair in Santa Monica covers everything from a sticking latch to a complete hinge and frame rebuild.
Gate Installation in Santa Monica
A new gate in Santa Monica has to be ordered and built, not rushed. We measure on site, spec marine-grade hardware and corrosion-resistant fasteners as baseline, then schedule the build and install. If it’s automated, we handle the Santa Monica permit path too. Gate Installation in Santa Monica covers the full process from first measure to final walkthrough.
Gate Motor & Opener in Santa Monica
Motors here die early because sea air eats connections and arm brackets. We service nine automation brands and diagnose before recommending replacement, which matters when the failure is just a corroded wire or a salt-fouled limit switch. Gate Motor & Opener in Santa Monica covers swing, slide, and trolley openers on residential gates.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Santa Monica
Gate access control in Santa Monica fails most often at the entry point: keypads and card readers whose circuit boards corrode from months of marine-layer moisture, and phone entry systems whose wiring wicks salt water up from the conduit. We work on intercoms, keypads, card readers, and phone entry units on apartment buildings near the beach and on estates north of Montana, and the fix usually costs less than replacing the whole system. That’s the work we do under Gate Access Control, priced in writing before we start.
Keypad Entry
Signs you need it
The keypad buttons stick, the backlight flickers, or codes stop working after foggy nights.
What it costs in Santa Monica
Installing a new keypad entry system in Santa Monica typically runs $260-$520 for residential keypads, while multi-tenant commercial systems at dingbat apartment buildings run $680-$1,280 depending on the number of codes and whether we run new low-voltage wiring.
How we do it
We test the existing wiring for corrosion, replace the keypad with a weather-sealed unit, and photograph the new programming before we leave.
Video Intercom
Signs you need it
The screen goes blank, audio crackles, or the unlock button works only intermittently.
What it costs in Santa Monica
Video intercom repair in Santa Monica falls between $280 and $430 for replacement handsets or outdoor call stations, with wired installations inside salt-exposed enclosures running $670-$1,050.
How we do it
We trace the low-voltage wiring for salt-damaged connections, replace the failed component, and seal the enclosure against the marine layer.
What Gate Access Control Costs in Santa Monica
| Item | Typical range in Santa Monica |
|---|---|
| Keypad entry (residential) | $260 - $520 |
| Video intercom repair | $280 - $430 |
| Commercial phone entry system | $680 - $1,350 |
Can you repair a rusted gate keypad in Santa Monica without replacing it?
Often yes. We open the unit, clean the board, and replace corroded contacts. If the board is too far gone, we quote a new weather-sealed keypad. Call (213) 267-6777 for an exact assessment.
Do you install video intercoms on apartment buildings near the beach?
Yes. We replace outdoor call stations with units rated for coastal exposure and re-seal the conduit entry points. Most apartment intercom replacements in Santa Monica are done in a half day.
Gate Parts & Welding in Santa Monica
Gate parts and welding in Santa Monica is mostly about rust: hinges that seize from salt moisture, lower rails that rust through at the weld, and posts that lean after years of marine-layer exposure. We replace what’s structurally gone and weld what can be saved, and every job includes a photo record of the repair so you can see exactly what was done. That’s the work we do under Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or squeals when it swings.
What it costs in Santa Monica
Hinge replacement in Santa Monica typically runs $110-$270 per hinge for standard steel hinges, with heavy-duty or custom-machined hinges for North of Montana estate gates running $220-$440 each.
How we do it
We cut off the old hinge, grind the post clean, weld the new hinge in place, and photograph the weld before we re-hang the gate.
Custom Welding
Signs you need it
Rust holes, cracked rail seams, or a broken picket that left a gap in the gate face.
What it costs in Santa Monica
Custom welding in Santa Monica ranges from $180 for small picket fixes to $1,080 for larger structural repairs on steel driveway gates, depending on the extent of rust removal and fabrication.
How we do it
We cut out the rust-damaged section, form a matching patch or replacement piece, weld it in, and apply a corrosion-resistant coating before photographing the finished repair.
What Gate Parts & Welding Costs in Santa Monica
| Item | Typical range in Santa Monica |
|---|---|
| Single hinge replacement | $110 - $270 |
| Heavy-duty hinge replacement | $220 - $440 |
| Custom welding repair | $180 - $1,080 |
Can you weld a rusted gate rail in Santa Monica without replacing the whole gate?
Usually yes. We cut out the rusted section and weld in new steel, then coat it. The gate stays in place unless the frame is structurally unsafe. Call (213) 267-6777 to have it looked at.
How long do welded repairs last in the Santa Monica salt zone?
With proper corrosion-resistant coating, a welded repair on a Santa Monica gate typically lasts five to seven years, matching the original metal’s lifespan here. We photograph the coating so you have a record.
Brands We Service in Santa Monica
We service Viking, DoorKing, Ghost Controls, and Elite automation systems across Santa Monica, along with five other major brands. We stock common control boards and safety edges locally, so most repairs happen the same day we diagnose the problem. See the full list on our brands.
Pricing for Gate Repair in Santa Monica, CA
| Service | Typical range in Santa Monica |
|---|---|
| Keypad entry installation | $260 - $520 |
| Video intercom repair | $280 - $430 |
| Commercial phone entry system | $680 - $1,350 |
| Hinge replacement (standard) | $110 - $270 |
| Hinge replacement (heavy-duty) | $220 - $440 |
| Custom welding repair | $180 - $1,080 |
| Gate repair service call | $95 - $195 |
| Gate motor repair | $240 - $590 |
| Swing gate operator replacement | $920 - $1,750 |
| Slide gate operator replacement | $975 - $2,400 |
| Full automated gate installation | $3,400 - $8,800 |
In Santa Monica, proximity to the ocean pushes prices toward the upper end of these ranges: hardware has to be marine-grade, and we often spend extra time cleaning corroded connections before new parts go in. Every one of these prices is written down and handed to you before any work begins, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Santa Monica
We work across Santa Monica, from the beach bungalows near Ocean Avenue to the estates north of Montana, and the apartment corridors along Wilshire and Santa Monica Boulevard. Most repairs get a same-day or next-day visit depending on when you call.
- North of Montana
- Ocean Park
- Sunset Park
- Wilshire-Montana
- Pico District
Service Area - Cities Near Santa Monica
We also cover gate repair and access control work in Venice, CA, Culver City, CA, Beverly Hills, CA, and West Hollywood, CA. Scheduling is coordinated from our Los Angeles office, with crews dispatched to Santa Monica daily.
Serving Santa Monica, CA - Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Santa Monica
Most Santa Monica gate repairs get same-day or next-day service. Emergency calls, like a gate stuck open on a busy street, get prioritized. Call (213) 267-6777 and a live person answers at any hour.
Santa Monica’s independent Building & Safety Division requires permits for automated gate operator installations. We handle that path for you. Basic hinge or weld repairs typically don’t require a permit.
Yes. Every job starts with a written scope and a written flat price, handed to you before any work begins. No verbal only, no surprise invoice at the end. That’s Clause 1 of the Haven Standard on every single job.
If your gate is sticking, sagging, or your keypad stopped reading codes, call (213) 267-6777 for a free estimate and a written price before anything gets touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Monica Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.