Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Hollywood
Gate repair in North Hollywood usually costs between $185 and $480 for most common repairs, with a North Hollywood Gate Motor & Opener replacement running $650 to $1,900 depending on the operator brand and whether the arm bracket is intact. We dispatch technicians to North Hollywood from our Los Angeles office every day, and a live person answers the phone at (213) 267-6777 around the clock. When a gate stops opening on Lankershim Boulevard or a hinge post has rotted through on a Magnolia Boulevard apartment building, the fix usually comes down to one thing: was the technician prepared for the specific failure modes this neighborhood produces.
We’re prepared. Adrian Vance started this company in 2014 on commercial access-control sites, and the documentation habit from that work carried over into every residential call we run in North Hollywood. You get a written price before we touch anything, and a photo record of what we found and what we replaced when we leave.
Why Vance Gate Repair Venice Is North Hollywood’s Preferred Gate Repair Company
North Hollywood’s gate landscape is unusual, and we know it well. The 1994 Northridge earthquake set off a renovation wave that put automatic gate operators on hundreds of apartment complexes and single-family homes between 1995 and 2002. Those operators are now 23 to 30 years old, and their control boards are failing in clusters. That’s not a coincidence. It’s a parts lifecycle issue specific to this zip code, and it means a local technician either carries period-specific control boards or the job turns into a two-visit headache. We carry them.
Our Gate Repair team works on nine automation brands, so we don’t steer North Hollywood customers toward replacing a motor when a board swap will do. Under Clause 1 of The Haven Standard, the price is written down and handed over before work starts. Under Clause 4, every visit includes a photographed record: what was found, what was set, what was installed. No future technician has to guess, and no homeowner pays twice to rediscover the same problem.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
Electric gate repair in North Hollywood means chasing electrical faults on operators that were bolted onto buildings as an upgrade, not designed into them. Control boards on late-90s LiftMaster and Elite/Linear units fail because their capacitors dry out; limit switches drift because the rack and pinion was mounted slightly out of alignment two decades ago. We test circuits, photograph the settings we change, and leave you the wiring readings. Most electric gate repairs in North Hollywood run $185 to $420.
Automatic Gate Repair
Automatic gate operators in North Hollywood deal with two Valley conditions stacked on top of each other: summer heat 15 to 25 degrees hotter than the Westside, and dust that works its way into gearboxes and chain drives. A misaligned photo-eye, the infrared beam that stops a gate if something crosses its path, is one of the most common automatic gate repairs we handle, and misalignment by two inches is enough to stop a gate entirely. We reset the beam, test both entrapment protections, and document the new position every time.
Hinge & Post Repair
Hinge and post repair in North Hollywood is often a corrosion job disguised as an alignment job. Winter rain pools on flat Valley driveways and sits there, corroding bottom hinges and the base of hinge posts until the gate sags and starts scraping the driveway. On 1950s and 1960s dingbat apartment gates, the posts were often set into older concrete with undersized footings. We cut out the rotted section, weld in new steel, and reset the post plumb before remounting the gate. Hinge replacements typically run $190 to $380 per gate; post repairs run $350 to $700.
Gate Realignment
Steel gates expand in Valley heat. When powder-coat on a North Hollywood gate burns off under years of inland UV, the bare steel underneath binds in its track as temperatures climb past 100°F. Realignment here means more than lubricating rollers. It means checking the post footing, adjusting the wheel carriage tension, and in many cases grinding down a heat-warped edge so the gate has proper clearance in August. We quote realignment flat rate, so the price on your written estimate is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We work on whatever motor is already on the property. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The North Hollywood-specific reality is that a large percentage of apartment complex operators were installed in the post-quake rebuild era and those are disproportionately LiftMaster, Elite, and Linear units. We keep period-specific control boards and logic chips for those brands stocked so the repair doesn’t become a two-week parts wait. If you have a Viking swing gate operator on a single-family home off Vineland Avenue, we service that too, and we carry the gearbox parts it’s likely to need before it fails.
Common Gate Repair Problems We See in North Hollywood Homes
These are the failures we see repeatedly across North Hollywood, from the NoHo Arts District up to Burbank Boulevard:
- Simultaneous control board failures on 1995-2002 operators. The post-earthquake renovation wave put automatic gates on hundreds of properties within a seven-year window, and those boards are now reaching end-of-life together. We stock replacements specifically for this cohort, which keeps call-backs low and repairs fast. A failing capacitor often presents as an operator that works intermittently for weeks before quitting entirely.
- Corroded bottom rollers and hinge posts from standing rainwater. Flat Valley driveways don’t drain like hillside lots. Winter rain sits at the base of gate posts, accelerates corrosion on bottom rollers and hinges, and produces a sagging gate that grinds against the concrete. The fix is usually new rollers plus a post-base inspection, not a whole gate replacement.
- Motor burnout from sustained Valley heat. Gates run 15 to 25°F hotter in North Hollywood than they do on the Westside. Motor insulation degrades faster, rubber wheel-guide seals crack, and steel gates expand and bind, which makes the motor work harder and fail sooner. Hardening seals and heat-related expansion are the two biggest contributors to premature operator failures in this zip code.
- Mismatched hardware on retrofitted dingbat apartment gates. Operators were bolted onto 1950s-1970s buildings as an afterthought, often with arm brackets that don’t match the post opening and footings poured decades before the gate existed. Repair means stabilizing the post first, then adjusting the operator, rather than forcing the operator to compensate for a failing post. If the post footings are inadequate, we tell you in writing before we quote the repair.
Pricing for Gate Repair in North Hollywood, CA
Here are the dollar ranges for the most common North Hollywood gate repairs. These are what we quote, in writing, before work starts:
- General service call with diagnosis and photo documentation: $75-$125, waived if you approve the repair.
- Electric gate troubleshooting and minor component replacement (limit switches, capacitors, photocell realignment): $185-$420.
- Hinge replacement on a single swing gate: $190-$380.
- Hinge post repair or reset, including welding and refooting: $350-$700.
- Gate realignment with roller replacement and track adjustment: $180-$340.
- Automatic gate operator motor or gearbox replacement: $650-$1,900, depending on brand and whether the arm bracket is reusable.
The price on your written estimate is the price you pay. It covers the labor, the parts, and the documentation. No discovery charges, no surprise line items after the gate is open again. Call (213) 267-6777 for a free estimate, and if another company has already given you a written quote, bring it with you. We review competing written estimates at no cost.
We Also Serve Cities Near North Hollywood
Our crews cover North Hollywood daily and also handle Gate Repair in North Hollywood work that spills into Studio City, Van Nuys, Sherman Oaks, and West Hollywood. If you live in one of those neighboring areas and need a written quote before any tool comes off the truck, the same service applies. The same documentation standard applies too.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
Because they were installed at the same time. The 1994 Northridge earthquake triggered a renovation wave across North Hollywood’s apartment stock, and between 1995 and 2002, a concentrated cohort of automatic gate operators went in on buildings up and down Magnolia Boulevard, Vineland Avenue, and throughout the NoHo Arts District. Those units are now 23 to 30 years old, and the control boards in that generation of LiftMaster and Elite/Linear operators used capacitors that dry out and fail around the same lifespan. So buildings that got gates in 1998 start calling for board replacements around 2025. It’s a parts lifecycle curve, not random bad luck. The fix is usually a board swap, not a motor replacement. Call (213) 267-6777 for an exact quote; we keep period-specific boards stocked for this very reason.
Valley heat shortens the life of a gate operator in three measurable ways: motor winding insulation degrades faster at sustained temperatures above 105°F, rubber seals on wheel guides harden and crack, and the steel gate itself expands, which increases the load on the motor every time it opens. North Hollywood sits consistently 15 to 25 degrees hotter than the Westside during summer, so an operator that would last 12 years in Santa Monica might fail in 8 here. The practical response is annual maintenance: we check motor temperature under load, lubricate the drive components with a heat-rated grease, and adjust travel limits to account for summer expansion. One visit a year is cheaper than a motor replacement.
Usually, yes. A sagging gate on a 1950s or 1960s North Hollywood dingbat building is most often a hinge post problem, not a gate panel problem. The post base corrodes where rainwater pools on the flat driveway, the post tilts, and the gate sags. We cut out the rotted section at the post base, weld in new steel, reset the post plumb, and remount the gate on new hinges. That typically runs $350 to $700, far less than a full gate replacement, which often isn’t necessary. We’ll tell you in writing whether the existing gate is structurally sound before we quote anything.
Yes. Any automatic gate operator in North Hollywood must have functioning entrapment protection, which means either photo-eyes (the infrared beam that reverses the gate if something crosses its path) or an edge sensor that detects physical contact, and in most cases both. This is a safety requirement under UL 325 and it applies to every automatic gate, whether it’s a single-family driveway gate off Burbank Boulevard or a 40-unit apartment complex on Magnolia. A gate without working entrapment protection can cause serious injury, and it is not something to disable or bypass. If your gate reverses unexpectedly or doesn’t stop when someone walks through it, call (213) 267-6777 and we’ll test the sensors and quote the repair in writing.
We repair nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In North Hollywood specifically, the highest volume we see is LiftMaster, Elite, and Linear on apartment complexes from the post-1994 rebuild era, plus Viking and Ghost Controls on newer single-family installations. We stock parts for all nine and we don’t steer you toward replacing a motor when a component repair will do. If you’re not sure what brand is on your gate, describe the operator over the phone and we’ll usually know from the symptoms and the housing shape. Estimates are free.
Call Vance Gate Repair Venice for Gate Repair in North Hollywood
If your gate is grinding, stuck open, refusing to respond to the keypad, or sagging enough to scrape the driveway, call (213) 267-6777. A live person answers, day or night. We’ll dispatch a background-checked, uniformed technician to North Hollywood with a name and photo sent before arrival. The written price comes before any work starts, and the photo record of what we found, what we adjusted, and what we installed goes home with you. Wherever you are in North Hollywood, from the NoHo Arts District to the Burbank Boulevard corridor, we’ll show you exactly what’s wrong and exactly what it costs to fix it.
Written by Adrian Vance, Owner at Vance Gate Repair Venice, serving North Hollywood with documented gate repairs since 2014.